---
title: "Makefile для STM32F103"
categories: ["mcu", "archive"]
date: 2017-02-26T00:00:00+03:00
draft: false
featured_image: miniature.jpg
---


Почти что в первый раз писал. Прошу простить за убогость и SPL. Всё это убирается. Под linux не проверялось.

<!--more-->

Рабочий проект: [stm32f103make.zip](stm32f103make.zip)


```makefile
CXX			= arm-none-eabi-g++
CC			= arm-none-eabi-gcc
LD			= arm-none-eabi-gcc
OBJCOPY		= arm-none-eabi-objcopy
SIZE		= arm-none-eabi-size
STFLASH		= st-flash
OPENOCD		= openocd
STUTIL		= st-flash


OUTPUT_DIR	= bin
OBJ_DIR	= obj

TARGET_NAME = led
TARGET_BINARY	= $(TARGET_NAME).elf
TARGET_HEX	= $(TARGET_NAME).hex

vpath %.c ./src

SOURCES	= \
main.c

LDFLAGS_DEBUG =
CDFLAGS_DEBUG = -g3 -O0

LDFLAGS_RELEASE =
CDFLAGS_RELEASE = -O2

CFLAGS		= -Wall \
-mcpu=cortex-m3 \
-mthumb \
-D__HEAP_SIZE=0x0000 \
-D__STACK_SIZE=0x0100 \
-mfloat-abi=soft \
-fno-strict-aliasing \
-fdata-sections \
-ffunction-sections \
-DSTM32F103C8 \
-DSTM32F10X_MD \
-DUSE_STDPERIPH_DRIVER

TARGET	= $(OUTPUT_DIR)/$(TARGET_BINARY)

LIBS = -lm

LDFLAGS		= \
--specs=nosys.specs \
--specs=nano.specs \
-mcpu=cortex-m3 \
-mthumb \
-Wl,--defsym=__HEAP_SIZE=0x0000 \
-Wl,--defsym=__STACK_SIZE=0x0100 \
-mfloat-abi=soft \
-fno-strict-aliasing \
-fdata-sections \
-ffunction-sections  \
-Wl,--gc-sections \
-Wl,-script="./hardware/stm32f103c8_flash.ld" \
-Wl,-Map=$(TARGET).map
#-u _printf_float

INCLUDES	= \
-I. \
-I./include \
-I./hardware/include \
-I./hardware/include/cmsis \
-I./hardware/SPL/include

STARUPFILE = hardware/src/startup_stm32f10x_md.S

SOURCES_SPL	= \
stm32f10x_rcc.c \
stm32f10x_gpio.c \
stm32f10x_dma.c

#stm32f10x_crc.c \
#stm32f10x_flash.c \
#stm32f10x_pwr.c \
#stm32f10x_tim.c \
#stm32f10x_adc.c \
#stm32f10x_dac.c \
#stm32f10x_fsmc.c \
#stm32f10x_usart.c \
#stm32f10x_bkp.c \
#stm32f10x_dbgmcu.c \
#stm32f10x_rtc.c \
#stm32f10x_wwdg.c \
#stm32f10x_can.c \
#stm32f10x_i2c.c \
#stm32f10x_sdio.c \
#stm32f10x_cec.c \
#stm32f10x_exti.c \
#stm32f10x_iwdg.c \
#stm32f10x_spi.c \
#misc.c

################################################################


SOURCES	+= $(addprefix hardware/SPL/src/, $(SOURCES_SPL))
SOURCES	+= hardware/src/system_stm32f10x.c

HEX	= $(OUTPUT_DIR)/$(TARGET_HEX)

STARTUPOBJ = $(notdir $(STARUPFILE))
STARTUPOBJ := $(patsubst %.S, $(OBJ_DIR)/%.S.o, $(STARTUPOBJ))

OBJECTS	= $(patsubst %, $(OBJ_DIR)/%.o, $(SOURCES))
OBJECTS += $(STARTUPOBJ)

DEPS	= $(OBJECTS:.o=.d)



all: release

release: LDFLAGS+=$(LDFLAGS_RELEASE)
release: CFLAGS+=$(CDFLAGS_RELEASE)
release: _firmware

debug: LDFLAGS+=$(LDFLAGS_DEBUG)
debug: CFLAGS+=$(CDFLAGS_DEBUG)
debug: _firmware


_firmware: $(TARGET) $(HEX)


$(TARGET): $(OBJECTS) | $(OUTPUT_DIR) $(OBJ_DIR)
	$(LD) $(LDFLAGS) -o $@ $(OBJECTS) $(LIBS)
	$(SIZE) --format=berkeley $(TARGET)

obj/%.cpp.o: %.cpp
ifeq ($(OS), Windows_NT)
	$(eval dirname=$(subst /,\\,$(dir $@)))
	@ if NOT EXIST $(dirname) mkdir $(dirname)
else
	@mkdir -p $(dir $@) $(TO_NULL)
endif
	$(CXX) -c -MMD -MP $(CFLAGS) $(INCLUDES) $< -o $@

obj/%.c.o: %.c
ifeq ($(OS), Windows_NT)
	$(eval dirname=$(subst /,\\,$(dir $@)))
	@ if NOT EXIST $(dirname) mkdir $(dirname)
else
	@mkdir -p $(dir $@) $(TO_NULL)
endif
	$(CC) -c -MMD -MP $(CFLAGS) $(INCLUDES) $< -o $@

$(STARTUPOBJ):
	$(CC) -c -MMD -MP $(CFLAGS) $(INCLUDES) $(STARUPFILE) -o $(STARTUPOBJ)

$(HEX): $(TARGET)
	$(OBJCOPY) -O ihex $(TARGET) $(HEX)

$(OUTPUT_DIR):
	@mkdir $(OUTPUT_DIR)

$(OBJ_DIR):
	@mkdir $(OBJ_DIR)

_size: $(TARGET)
	$(SIZE) --format=berkeley $(TARGET)


flash: flash-ocd

flash-stutil:
	$(STFLASH) --format ihex write $(HEX)

flash-ocd:
	$(OPENOCD) -f interface/stlink-v2.cfg -f target/stm32f1x.cfg -c "program $(TARGET) verify reset exit"

srclist:
	@echo $(SOURCES)

objlist:
	@echo $(OBJECTS)

clean:

ifeq ($(OS), Windows_NT)
	-del $(subst /,\\,$(OBJECTS))
	-del $(subst /,\\,$(DEPS))
	-rmdir /S /Q $(OBJ_DIR)
	-del /Q /F $(OUTPUT_DIR)\\$(TARGET_BINARY)
	-del /Q /F $(OUTPUT_DIR)\\$(TARGET_BINARY).map
	-del /Q /F $(OUTPUT_DIR)\\$(TARGET_HEX)
else
	-rm -f $(OBJECTS)
	-rm -f $(DEPS)
	-rm -rf $(OBJ_DIR)
	-rm -f $(OUTPUT_DIR)/$(TARGET_BINARY)
	-rm -f $(OUTPUT_DIR)/$(TARGET_BINARY).map
	-rm -f $(OUTPUT_DIR)/$(TARGET_HEX)
endif

-include $(DEPS)
```